WALL CLADDING SYSTEM
ALL IN ONE
Exterior Wall Cladding board is the latest innovation in exterior wall cladding system with thermal insulation, fire resistance, waterproof. The wall cladding Insulation board is widely applied for villas, municipal projects, large residential estate and other large-scale office buildings.
Exterior Wall cladding Panels can be installed in cold winter and hot summer area to keep it cooler in summer and warmer in winter. It definitely delivers great energy performance in such climate and may provide 15-20% energy costs saving year on year.
Strong decoration effect
Fluorocarbon coating owns particularly strong ultraviolet resistance, heat preservation decorates a whole board keeping building long-term bright color and lustre to last.
Good abrasion resistance
Great resistance competence to the score keeping the original building bright color and lustre, and bright as new.
Strong chemical resistance, excellent self-cleaning. Do not affect the surface after a long period. Excellent antibacterial properties, and it is suitable for clean space.
Long service life
Premium raw materials and scientific production technology to ensure service life more than 25 years.
Transfer imitation stone finishes enhance the taste of real estates, the price is far lower than the price of the stone walls.
Excellent heat insulation
Integrative panel has excellent heat insulation property, low and durable thermal conductivity. It is not influenced by temperature and humidity to keep the building in a constant temperature.
It is much lighter and easier to install compared with traditional aluminum plate.
What makes of the Exterior Wall Cladding Systems?
– Surface Coating: Natural stone, imitation stone, PVDF coating, etc.
– Substrate board: non-asbestos Calcium Silicate Board, Fiber Cement Panel
– Insulation materials: PU/EPS/TPS/XPS/Rock wool, with heat insulation performance
Decorative layer include Fluorine carbon coating, fluorocarbon metallic paint and fluorocarbon paint.
The Calcium Silicate Board is made of high strength inorganic resin plate with outstanding self-cleaning, the raining or water can refresh the surface coating against oil and stain. The surface coating may keep beautiful and clean after 30 years life span.
Dimensions and tolerances of Exterior Wall Cladding System Panels:
1. Check at the grass-roots level
Wall outside surface after painting at the grass-roots level shall meet the following requirements:
- Dry and clean.
- Eliminate bump, empty drum degeneration.
- The surface must not have pulverization, peeling phenomenon.
2. The line space
Should set the vertical and horizontal line for flat base, according to the configuration design of separation scheme, pop-up installation line every board.
3. Borehole embedded bolts
Line to play good, after review and correct, according to play good line drilling embedded bolts.
4. Pre-loaded with anchoring
Lanchor pieces with pendant fitting by expansion bolt in the wall.
5. The preparation of adhesive mortar
According to the proportion, and the good bonding mortar should be finished within 1.5 hours. Heat preservation to decorate a whole plate of bonding area should not be less than 50%, using dope putting “box” method.
6. Adhesive + anchoring
Hang from the lateral and medial respectively in decoration plate edge groove and heat preservation to decorate a whole plate fixed by bolts and adhesive mortar on the wall.
7. Seven, filling bubbles, paste the masking tape
Within the separation seam filling foam, and then paste the masking tape on either side of the seam.
8. Filling silicone sealant
To squeeze silicone sealant in the plate seam, in the process of squeeze QiangZui should into cracks more than 4 mm, uniform to move slowly and continuously.
9. To tear in addition to the crepe paper, protective film
After silicone sealant neat scraping, and then stripped crepe paper, protective film on all the unfinished project before it is strictly prohibited to tear in addition, if coated board face, you should peel off while off the scaffold.